OIL SEALS TYPE GM: Design GM
All rubber oil seal with a vulcanized stainless steel finger spring. Recommended for difficult assembly conditions and replacements of the seal on site.
DIMENSIONS: Min. I.D. 100 mm; Max. O.D. 2.000 mm in one single piece; Larger than 2.000 mm by hot-vulcanizing jointing technique
WORKING SPEED: Up to 25 m/s
MISALIGNMENT: Up to 0,2 mm
SHAFT HARDNESS: 40 HRC
SURFACE FINISHING: Ra = 0,3 - 0,5
PRESSURE: 0 BAR (0 MPa) “split” – 0.2 BAR (0.02 MPa) “endless”
USE: Radial Sealing
OUTSIDE Ø: Rubber
CONSTRUCTION: All rubber oil seal + Sealing lip + Finger spring
Applications
|
Dimensions
|
Stocklist
|
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Search by |
|
|||||||||
| Order by | code | B | A | H | NBR | SIL | FKM | |||
| {[ value.codice | valueFormat:'codice' ]} | {[ value.B | valueFormat:'B' ]} | {[ value.A | valueFormat:'A' ]} | {[ value.H | valueFormat:'H' ]} | {[ value.NBR | valueFormat:'NBR' ]} | {[ value.SIL | valueFormat:'SIL' ]} | {[ value.FKM | valueFormat:'FKM' ]} | ||||
dimensions on request
